Versatile timber trailer for ATVs or cpmpact tractors with its own power pack.
There are 5 models available from 3.6 & 4.2m reach cranes, with or without wheel drive and articulated steering.
The 9 hp petrol motor provides the trailer with the power it needs, crane with superior movement pattern and strength. Wheel drive via rollers on the well-treaded tyres, terrain-friendly bogie and good ground clearance.
Rotatable 50 mm ball coupling for your safety, flexible and simple engagement and disengagement as well as high loading capacity makes this trailer both safe and reliable.
Horizontally adjustable bogie for adaptation to different lengths of timber and thus also adjustment of the pressure on the ball hitch on the ATV. This is very important as too much pressure can damage your ATV and a negative pressure makes the rig unstable and dangerous.
The wheel drive substantially increases accessibility and makes it easier to get around in the forest and past difficult areas. The rig can also be equipped with a hydraulic winch and articulated steering is now also available.
Hydraulic stabilisers mean that the trailer remains stable during loading and unloading. All hydraulics and hoses are built in and guarded to minimise the risk of external damage. The sliding bogie enables the centre of gravity to be adapted according to different timber lengths.
All in all, the technology, strength, safety and price will make this trailer an appreciated companion in the forest for many years.
Product codes:
- 3.6m reach crane and 2 ton trailer: FT36-2T (SKU: 21-SV20.101E)
- 3.6m reach crane with 2 ton powered drive trailer: FT36D-2T (SKU: 21-SV20.900E)
- 3.6m reach crane with 2 ton articulated steering trailer: FT36DFR-2T (SKU: 21-SV20.300E)
- 4.2m reach crane with 2 ton articulated steering: trailer: SKU: FT42DFR-2T
- 4.2m reach crane with 3 ton articulated steering: SKU: 21-SV30.1
FT – Forestry Trailer; 36/42 – Crane length 3.6 / 4.2 metres; D – Wheel drive; F – Frame steering; R – Radio control.
Features
- Electric start 9 hp petrol motor / 10 hp on 4.2 with 3 ton trailer
- Wheel drive via hydraulic rollers between the tyres on some models
- Terrain-friendly bogie
- High ground clearance
- Stable frame makes it easy to pull the trailer
Specification
- Central beam: Front 80 x 80 mm, Rear 90 x 90 mm
- Wheel drive: Hydraulic motors, 2 x 160 cc
- Ground clearance: 300- 400 mm, c-pipe
- Headboard: W x H 1,100 x 720 mm
- Gripping area: 0.09 m²
- Grapple: 700 mm (width)
- Wheels: Deep tread pattern 23 x 10 x 12
- Hydraulic stabilisers: Yes
- Load width: Internally 600 mm (bottom), 1,100 mm (top)
- Lifting capacity: at 3m: 175 kg / 4.2m: 100Kg / 4.2m with 3 ton capacity 200 Kg
- Max. load: 2,000 kg or 3000 kg
- Electric start engine for the hydraulic valve block: 9 hp or 10 hp
- Crane reach: 3,600 mm or 4200mm
- Fully rotating rotator: Yes
- Bolsters: 4, height 800 mm
- Valve block: Italian, 5-lever + 2 stabilisers
N.B. Spec might change from what is sted on the website. Please contact us for most recent technical information
Please Note:
This item is supplied in a kit and will require building up if delivered direct to you.
Brochure
Customer testimonial
Mr Karl Bredendieck, Remote Presence, Skibbereen, Co. Cork, Ireland.
31st January, 2019
“We’re busy here, still trying to get ahead of previous storm damage in the woods. The trailer has been a huge asset in bring larger material over longer distances. I wouldn’t be without it at this stage. Your service is excellent! Adrian was straight on to me and offered a series of suggestions, all of which make sense and I’ll run through them when I’m next at the machine”
Picture below supplied by Mr Bredendieck with his 21-SV36 (non wheel powered)
Mr M. Shrimpton, Turnerspuddle, Dorchester, Dorset
7th February, 2019
Picture below supplied by Mr M. Shrimpton
