Logosol PH260

The PH260 – Precision, Power, and Capacity

This Industrial Quality Planer/Moulder can Transform Your Operation

With the PH260 you can take sawn lumber and simply turn it into a profitable finished product. The PH260 planes and moulds 4 sides at once. You can quickly and easily produce all imaginable standard and custom-made mouldings (t&g, ship lap, casings, crowns etc). As it is easy to reset the cutters, the PH260 is also perfect for short customized series.


Planes and moulds all four sides in one single operation.

Superior Finish

The quality you get with a board that is machined in Logosol’s planer/moulder equals the quality by any other machine on the market. Other than the very high cost associated with other machines that produce high-end finished products, the only other difference is speed. While some other machines are faster, the 1200+ linear feet per hour (400 m/hour) that the PH260 produces is more than capable of keeping up with your highest demand jobs.

The PH260 is different from traditional multi-cutter planers due to the top cutter and bottom cutter being suspended on both ends of the cutter shaft. Due to this, the machine is extremely stable, even though it has considerably wider cutters than most large planer/moulders. The machine table, where the bottom cutter and the side cutters are fitted, is made of heavy cast iron. The machine chassis is made of 5/32” (4 mm) sheet steel.

Produce Deep Mouldings

Our cutters can handle sizeable depths. This makes it possible to cut deep and beautiful patterns. The top cutter can plane to a depth of 5/16” (8 mm), plus the moulding depth, in one single operation, and the side cutters can cut even deeper.

A Wide Range of Mouldings

The PH260 can handle everything from quarter round to wide plank t&g flooring. You can choose from a wide range of standard moulding knives or order your own custom-made knives.

Adaptable to Other Cutter Heads

When delivered, the planer/moulder is ready for 4-side planing. It is set up with HSS planing knives in the top and bottom cutters, and 2” (50 mm) HSS planing knives in the side cutters. The 1 3/16” (30 mm) spindle diameter of the side cutters enables you to choose from a number of other specialized cutter systems that are available on the market today. Spacers shipped with the PH260 will adapt the side spindles to accept 1 ¼” shaper heads.

Our Customers

Many of our customers only have their PH260 for personal use. Even more of them combine this with selling the finished products or offering subcontract work on a limited scale. It does not require many hours of paid planing/moulding per year to cover the annual cost of a PH260. The largest customer group consists of small businesses in the wood processing field.


  • 30 mm (1 3/16″) spindle axles, a wide range of moulding knives. Mounting only takes 10-20 minutes.
  • Easy setting with user friendly scales.
  • Rust proof for outdoor use and minimal maintenance.
  • Ability to start each of the five motors separately.
  • Clear plastic window makes it easy to supervise the process.
  • 6000 rpm ensures a smooth surface finish.
  • Low-friction inlay in the machine table ensures problem-free feeding.



Width:  15-260 mm (5/8-10 1/4″)
Height:  10-100 mm (7/16-3 15/16″)
Width:  Up to 300 mm (11 7/8″)
Height:  10-230 mm (7/16-9″)

Upper Cutter Planing/Moulding

Width:  Up to 410 mm (16 3/16″)
Height:  10-230 mm (7/16″-9″)

Upper Horizontal Cutter

Diameter:  72 mm (2 7/8″)
Width:  410 mm (16 3/16″)
Continuous output:  4 kW (5 hp)
Number of rev.:  6000 rpm (50 Hz); 7000 rpm (60 Hz)
Max. take-off, planing:  8 mm (3/8″)
Max. take-off, moulding:  20 mm (3/4″)

Lower Horizontal Cutter

Diameter:   72 mm (2 7/8″)
Width:   300 mm (11 7/8″)
Continuous output:   3 kW (4 hp)
Number of rev.:   6000 rpm (50 Hz); 7000 rpm (60 Hz)
Take-off, planing:   0-4 mm (0-3/16″)
Max. take-off, moulding:   5 mm (1/4″)

Side Cutters

Spindle axle diameter:   30 mm (1 3/16″)
Max. cutter height:   100 mm (3 15/16″)
Max. cutter diameter:   140 mm (5 9/16″)
Continuous output:   3 kW (4 hp)
Number of rev.:   6000 rpm (50 Hz) 7000 rpm (60 Hz)
Max. cutting depth:   30 mm (1 3/16″)
Only with properly sized tooling.

Included Side Cutter Heads and Knives

Two TB90 side cutter heads and four 50 mm (2″) wide planing knives included.
Cutter diameter:
90 mm (3 9/16″)
Cutter height: 40 mm (1 5/8″)

Feed System Feed rollers:

5 feed rollers – 4 metal, 1 Polyurethane
Transmission: Chain driven direct drive with variable feeding speed.
Feed rate:
Standard: 2-12 m/min (11-52 ft/min)
Continuous output:  0.18 kW (0.25 hp)

Electrical System

Moisture protected, IP54
Total continuous output: 13.2 kW (17.3 hp)
Electricity supply:
3-phase, 400V, 16 A
3-phase, 220V, 50 A
1-phase, 220V, 50 A

Size and Weight

Length:   1100 mm (43″)
Width:   900 mm (35″)
Height:   970 mm (38″)
Weight:   350 kg (772 lbs)

News PH260 ECO

New unique 4-sided planer/moulder

A unique four-sided planer/moulder, available in a new price range. The functions of this machine are more than adequate for most building projects, and are ideal when you primarily want to plane and mould for your own consumption.

  • Machines dimensions up to 260×100 mm on four sides
  • Planes up to 410 mm in width
  • Simple settings and clear scales in steps of 0.1 mm
  • Impressive performance and quality
  • Superb surface finish
  • Can do everything from picture rails to house timber

Differences compared to the PH260

  • Lower price
  • The motor for the top cutter is somewhat smaller (3 kW instead of 4 kW)
  • Fixed feed, 5 m/min, instead of 2-12 m/min.
  • No vision panel in the cover
  • No internal hoses (the hose is to be directly connected to the duct at the cutter)



Price list

From £ 7,340 plus VAT