Logosol

Logosol DH410

A reliable planer with a width of 410 mm (16 3/16”)

Two-sided planer/moulder which planes up to a width of 410 mm (16 3/16”) and a height of 260 mm (10 1/4”)

dh410_illustration_defaultPlanes two sides in one pass. Four-sided planing is made by running the board twice through the machine.

Logosol DH410 has a lot in common with our PH260. The machine is built on the same principles and most of its components are the same as PH260’s, which means that it is a very sturdy machine with a cast-iron machine table and separate motors for each cutter and the feeder. Both the machines also have the same type of knives and cutter heads.

The difference is that DH410 works with two cutters instead of four. Four-sided planing is made by running the board twice through the machine, while you only machine the board once when planing and dimensioning two sides up to a width of 310 mm (12 1/4″) and a height of 100 mm (3 15/16″).

NEW! Improvements model 2

✔ New design!

✔ Extended machine table

✔ Better in-feed guidance

✔ Easier adjustment of fences

✔ Chip outlet for top cutter, 125 mm in diameter, new design

✔ 20 mm profile depth, top cutter

✔ Stronger bearing in top cutter

Our customers

The DH410 is primarily bought by customers who want a machine that can produce the same result as a four-sided planer/moulder, but can accept that the production takes a little more time. One advantage of the DH410 when compared with the PH260 is that you get a planer with a width of 410 mm (16 3/16″). Some of our customers have rebuilt the DH410 to make it possible to plane tapered boards for flooring or panelling. The machine can also be used as a vertical mill with feeder. If you do not want to plane the top side of the board, you replace the steel rollers with rubber rollers.

Features

  • Easy setting with userfriendly scales in 0.1 mm (1/8″) steps.
  • Ability to start each of the three motors separately.
  • 6000 rpm ensures a smooth surface finish.
  • Max. planing dimensions: 410×230 mm (16″x9″).
  • Rust proof for outdoor use.
  • Low-friction inlay in the machine table ensures problem-free feeding.
  • Minimal maintenance.

Technical data

Planing

WIdth: Max. 410 mm (16 3/16″)
Height: Max. 230 mm (9″)

2-sided Planing

Width: Max. 325 mm (12 7/8″)
Height: Max. 100 mm (3 15/16″)

Horizontal cutter

Diameter: 72 mm (2 7/8″)
Width: 410 mm (16 3/16″)
Continuous output: 3 kW
Number of rev.: 6000 rpm
Take-off, planing: Max. 8 mm (1/4″)
Take-off, moulding: Max. 10 mm (7/16″)

Side Cutter

Diameter: 90 mm (3 9/16″)
Height: 40 mm (1 5/8″)
Max. diameter: 140 mm (5 9/16″)
Max. height: 100 mm (3 15/16″)
Spindle axle: 30 mm (1 3/16″)
Continuous output: 3 kW
Number of rev.: 6000 rpm
Cutting depth: Max. 30 mm (1 3/16″)

Included knives

Horizontal cutter: 410 mm (16 3/16″)
Side cutter: 50 mm (2″)

Feeder

Continuous output: 0.18 kW
Speed, Standard: 19 ft/min.
Speed, Option 7-39 ft/min.
Speed, Option 13-79 ft/min.

Electrical system

Moisture protected IP54
Total continuous output: 6.2 kW
Electricity supply: 3-phase, 400V, 16 A
Also available as single phase 220V

Dimensions

Length, width: 990×840 mm (39″x33″)
Height: 1220 mm (48″)
Weight: 225 kg (496 lbs)

Images

Videos

Price list

From £ 3,450 plus VAT

Enquire