|
Home
Up
Access plaftorms
ATV equipment
Carlton Stump grinders
C-Dax sprayers
Compact tractors
Draper
Drum Mowers
Dual Spreaders
Efco
Eliet Shredders
Flail Mowers
Fraser muck spreaders
Hakki Pilke processors
Kranzle pressure washers
LumberMate Saw mills
Kuhn
Loaders
Mics
Opico Grass Harrow
Orsi Hedgecutters
Post hole borers
Post Knockers
Ritchie
Suzuki ATV's
Thor Logsplitter
Weidemann loaders
Woodchippers
Zetor tractors
AW Trailers
| | Hakki Pilke are a well known fuel wood
processor from Finland. The range will suit the hobby user up to
the professional user, available engine, p.t.o. or electric motor powered.
Please choose from the models listed below:
| Model |
Picture |
Description |
| Eagle
Saw bench |
 |
700mm
blade, pto driven with only 10hp requirement
The traditional way of making firewood; cutting timber with a circular saw and dividing it with a splitting
cone - First cut the trunk of a tree into stumps of the desired length and then split each stump with a splitting cone.
The eagle is suitable for both big and small logs and it is easy to use.
|
Hawk
|
 |
Hydraulic sawbar, hydraulic discharge conveyor and hydraulic splitting. Cross-cut sawbar. Compact size! It can be transported by towing.
- Available for a tractor drive, an electric drive or a petrol engine |
| OH60 |
 |
Hakki Pilke 60 is a firewood processor which uses a
700mm circular saw for cutting wood. The device has its own hydraulics. Power options: tractor engine or electric engine (the processor, which uses an electric engine, can also be used with a tractor engine).
15hp required.
Cutting takes place by a circular saw which is equipped with a standard blade or with a hard metal blade for cutting dirty wood.
Wood: maximum log diameter 25 cm, maximum log length 55 cm |
| 1X–37 |
 |
16”
crosscutting chainsaw, adjustable 4 way splitting wedges, two speed log
splitters with 7 tonne splitting force, 2.2m hydraulic drive in feed
conveyor with reverse, 15hp PTO power requirement, 4m folding discharge
conveyor
Options
include: 3 phase electic motor, hydraulic controls, 6 way splitting
wedge, log rack, hydraulic log lifter and log rack |
| 2x |
 |
13”
cross cutting saw, Twin adjustable 4 way splitting wedges, twin log
splitters with 5.5 tonne splitting force, 2.2m hydraulic drive in feed
conveyor, 15hp PTO power requirement, 4m folding discharge conveyor.
Options include: 3 phase electic motor and hydraulic controls |
2x32
Greenspreed |
 |
This processor has a twin splitter Capable of handling wood up to 32cms
this machines comes with hydraulic controls as standard, 3 speed splitting (auto); hydraulic conveyor slewing from side to side; stop and start chain.
Super value for money
Options
include: 3 phase electic motor, 6 or 8 way splitting
wedge, log rack, hydraulic log lifter and log racK |
| 1x42
Greenspeed |
 |
Capable of handling wood up to 42cms this machines comes with hydraulic
controls as standard, weight 1000kg approx; 13 ton splitting force; 3 speed splitting (auto); hydraulic conveyor slewing from side to side; stop and start chain.
Super value for money
Options
include: 3 phase electic motor, 6 or 8 way splitting
wedge, log rack, hydraulic log lifter and log racK |
| Big
47 |
 |
18”
crosscutting chainsaw, Choice of 4,6,8 and 12 splitting wedges, 20 tonne
two speed splitting, 2.6 infeed conveyor, 4m discharge conveyor with
hydraulic raise and lower folding and slewing, PTO driven
Options
include: 3 phase electric motor, hydraulic chain saw, hydraulic log
feeder deck and 2m deck extension |
|
