Home
Up
LumberMate Pro MX34
Lumbermate Pro MX34 accessories
LumberLite ML26
LumberLite ML26 accessories
LumberMate Specification
LumberMate Projects
Lumbermate delivery
SkidMate
hire or buy
| |
Tailor your LumberMate Pro to match your sawmilling
needs now, or later as your milling operation grows.
|
Trailer/Support Jack Package
Tow your LM Pro from job to job on highways behind your pickup*, and
through your woodlot right to your milling site behind your ATV. When
you get there, quickly and firmly level the log deck with the support
jacks. Package includes independent, shock-absorbing, self-damping
torsion suspension axles, two 5-bolt full-size wheels, highway running
lights and wiring harness, safety chains, 2 (50mm) coupler and 6
support jacks. Note: Maximum of one 4-foot bed extension permitted on
trailer-equipped model.
(Item No. LM34-41150)
|
 |
Leveling Stands
Ideal for the stationary-model of the LM Pro, sturdy 9-high stands
(22.5cm) deliver solid support and quick-leveling capabilities for
faster set-up times. Set includes 10 leveling stands. Add two leveling
stands (1/5 set) to support each 4-foot bed extension.
(Item No. LM34-41170)
|
|
4-Foot Bed Extension
Standard, the LumberMate Pro mills up to 13-feet (3.9m) long. To mill
logs 17-feet (5.1m), add one 4-ft (1.2m) extension. To mill 21-feet
(6.3m), add two extensions. Mill 41-foot (12.3m) beams with 7
extensions! Each 4-foot extension bolts permanently to the end of the
log deck. Additional log rest/dog clamping assemblies sold separately.
Note: Maximum of one 4-foot extension permitted on
trailer-equipped model.
(Item No. LM34-41130)
|
|
Detachable 2-Foot Bed Extension
Secures to the log deck with quick-connect pins. This optional 2-foot
(0.6m) extension lets you mill longer logs without permanently
extending your bed. Especially useful to squeeze out extra milling
capacity on the trailer-equipped LumberMate. Stow it conveniently out
of the way when not in use. Add a second to get 4-feet (1.2m) extra
capacity.
(Item No. LM34-41140)
|
|
Log Loading/Rolling & Ramp
Package
A must for milling
operations without access to heavy-lift loaders or forklifts.
Load large logs onto your LM Pro and hold them in place for
quick-dogging. Pass the winch cable over and around
the log, connect it to the log deck frame and operate the winch
the log rolls up the ramps onto the bed. Also makes
rolling (rotating) the log on the bed a snap speeds up squaring
cants. Package includes two loading ramps, 2-speed
1800 lb. winch, mast/boom & receiver and log-rolling hook.
(Item No. LM34-41400)
|
|
Saw Carriage Cover
Protect your investment.
Made from the same rugged material used for transport-truck covers
theyre rip, rot and UV-resistant. Tailored specifically for the
LumberMate Pro to fit snuggly over the whole carriage and equipped
with draw-cords.
(Item No. LM34-41290)
|
|
Lap Siding & Shingle Making
Package
Make shiplap and cedar-shake
siding quickly and easily. With this unique jig, cut lap-siding 7
12 (17.5 30cm) wide, with taper widths down to a
feather-edge. Reconfigure the jigs and make cedar-shake shingles 7
12 (17.5 30cm) wide and up to 20 (50cm) long Each
pass makes two shingles. Two jigs per set. Tip: To
double shingle production, add an extra set.
(Item No. 41270)
|
|
Toe Board & Log
Repositioning Package
Quickly compensate for log
taper and mill true, high-value lumber. Equipped with rollers for
easier, faster log repositioning on the log deck. Lateral quick-adjust
design so you can locate and lock each toe board directly under the
load. Two units per set.
(Item No. LM34-41285)
|
|
Quick-Click© Indexing Detent
Setworks
Quickly see your next depth
mark. A weight/gravity indicator clicks into detents on
specially-calibrated scales available in various standard
board-thickness increments.
 | Quick-Click© Indexing Detent
Setwork Indicator System
(Item No. LM34-DSIND)
| Ύ Detent Scale
(Item No. LM34-DS34S)
| 6/4 Detent Scale
(Item No. LM34-DS64S)
| 8/4 Detent Scale
(Item No. LM34-DS84S) |
| | |
|
Brochure
download 
Video
|
