|
|
daviesimplementsltd.co.uk |
|
|||
| Home | New Machinery | Used Machinery | Hire | News | Contact us |
|
|
Dual Spreaders |
|
|
||
| ||||||||||||||||||
|
|
System Advantages (features and benefits)
Powerspread Dairy 1300, 1600,1800 and 2000The Powerspread Dairy is the general purpose side discharge farm spreader that will spread all types of slurry and straw yard dung. It has a fixed main auger speed of 13 rpm at 540 PTO speed which makes for fast and efficient spreading. The overshot impeller spins at 700 rpm giving a fine fragmentation to the dung and an even and accurate spread of up to 18metres width. The patented centrally opening door is fed from both ends of the spreader body by means of a contra rotating auger which reduces internal stress in the spreader body and provides a boiling action to further break down the dung inside prior to being spread by the impeller. The door opens vertically allowing use of the full width of the impeller even when applying a very fine amount of slurry or dung. The drive system is via a heavy duty chain and sprocket system for ease of maintenance and has separate shear bolt protection for both the auger and the impeller. The tapered body design and low central auger gives good stability and the standard 21.3 x 24 tyres ensure minimal compaction. The Powerspread 1300 is especially designed to be a low loading height machine (2.03metres) for use with skid steer loaders and for use under slurry ramps. Powerspread
Contractor 1600, 1800 and 2000 The Powerspread
Contractor is a side discharge spreader with overshot impellor as found on the
other spreader in the Shelbourne
Reynolds range the Powerspread Dairy but with unique new features. The
drive system is a heavy duty self lubricating chain drive with reversible
sprockets to give the option of 3 main auger speeds of 3, 9 and 13 rpm. This
range of auger speeds allows the Powerspread Contractor to spread all classes of
manure from slurry and straw yard dung to dry broiler litter in an accurate and
even spread pattern of up to 18 metres. The main auger pulls in both ways to the
patented centrally opening door and has shear bolt protected auto reset paddles
that discharge to the impellor. The drive line also has a reverse drive fitted
to help clear any obstructions inside the spreader, this coupled with the drop
down drip tray and impellor will ensure that any obstructions can be removed
quickly and spreading can continue with minimal time loss. Maintenance
time is dramatically reduced by the standard fitment of a single point greasing
system for all drive line bearings and an auto lubrication system for the heavy
duty chain drive. The contractor comes as standard on 23.1 26 tyres which are mounted on 40 kmh hydraulically braked axles to match the speeds of modern tractors. These features all combine to give the Powerspread Contractor the ability to give a high work rate with fast and efficient spreading. Powerspread Contractor 2200, 2500 and 2800 The Powerspread
Contractor is a side discharge spreader with overshot impellor as found on the
other spreader in the Shelbourne Reynolds range the Powerspread Dairy but with
unique new features. The
drive system is a heavy duty self lubricating chain drive with reversible
sprockets to give the option of 3 main auger speeds of 3, 9 and 13 rpm. This
range of auger speeds allows the Powerspread Contractor to spread all classes of
manure from slurry and straw yard dung to dry broiler litter in an accurate and
even spread pattern of up to 18 metres. The main auger pulls in both ways to the
patented centrally opening door and has shear bolt protected auto reset paddles
that discharge to the impellor. The drive line also has a reverse drive fitted
to help clear any obstructions inside the spreader, this coupled with the drop
down drip tray and impellor will ensure that any obstructions can be removed
quickly and spreading can continue with minimal time loss. Maintenance
time is dramatically reduced by the standard fitment of a single point greasing
system for all drive line bearings and an auto lubrication system for the heavy
duty chain drive. The
large contractor differs from the standard contactor in the length of the body,
it being 1.6 metres longer to give the increase in capacity, and has a
strengthened chassis and extra ribs on the body to accommodate the extra weight
carried. The overall width of the large contractor remains the same as the
standard machine for ease of manoeuvring and to conform with legal width
requirements for road use. The large contractor comes as standard on 600/60 – 30.5 tyres which are mounted on 40 kmh hydraulically braked axles to match the speeds of modern tractors. These features all combine to give the Powerspread Contractor the ability to give a high work rate with fast and efficient spreading.
|
|
